Comparison reviews

SilverStone manufactures PlayStation 5 standard heat sinks for SSD

Although many companies have released M.2 SSDs designed specifically for Sony PlayStation 5 consoles, there are still some enthusiasts who already have unused high-end SSDs and can use them with their PlayStation 5 consoles. In response to these audiences, SilverStone has introduced the TP05 heat sink suitable for M.2-2280 drives, which is very suitable for PS5.

SilverStone TP05 (SST-TP05B) Consists of an aluminum heat sink with a height of 5.6 mm, an aluminum bottom cover, and two types of thermal pads: 0.5 mm thick for the bottom of the driver (with a thermal conductivity of 1.8W/mK) And 1.75 mm thick driver top (with 1.5W/mK thermal conductivity).The cooling system can be used with any M.2-2280 SSD and ensures good heat dissipation under high loads on both sides of the drive, report Winter Palace Akihabara.

(Image source: Silverstone)

Although the PlayStation 5 can accommodate off-the-shelf SSDs manufactured by third parties, the console has Very specific requirements For these devices. First, it should have a PCIe 4.0 x4 interface and provide a sequential read speed of 5500 MB/s or higher. Secondly, the thickness of its main heat sink should not exceed 8 mm, and the thickness of its auxiliary heat sink should not exceed 2.45 mm.

The whole thing is no different Build your own external SSD, Just for what you put into PS5.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button